According to modern standards of construction, all the utilities that are available in a residential area, it is necessary to lay special internal channels called Stroebe. These communications include water pipes, electrical cables, heating, gas, sewer, highway conditioning system. Installation in such channels is required, both in terms of practicality and safety and in terms of aesthetics. Today, therefore, cutting cutting grooves is a mandatory step in the construction and repair.

Work on the creation of such channels is quite time-consuming and unpleasant. Many artists prefer to make installation of communications after performing rough finishing. Indeed, after the elections, is already becoming clear floor level, known direction of the wall, ie, is reduced to a minimum probability of communication damage. But the creation of cutting grooves in any case have to deal with. Some artists manage to make them only with the help of Bulgarians and respirators, although this is quite a "dusty" occupation. Also, very often Stroebe do installers communications using chasers complete with a vacuum cleaner. But it is much easier to rent a tool such as a wall chaser, referred to and will in this article. Tell you the rules of operation of the instrument and then choose a wall chaser.

How does the wall chaser

Stroboresis is a highly specialized power tool. This tool allows you to make relatively wide and deep furrows in mineral bases. Externally, it looks like a habitual grinder. Therefore, many consider the strokesus of its variety. However, the difference is that the strokesis makes it possible to cut the right size shortcomings much faster. If you use this tool instead of a grinding machine, you can reduce the level of dusting indoors, and without the use of the vacuum cleaner.

In its design, the strokesis have two disks for sawing, which can be installed at different distances from each other. Therefore, in one pass, two parallel cuts are formed by this tool, which allows you to get a stroke in a short time.

In addition, the strokesons are equipped with sleds with 2-4 guide rollers, which can be installed in various positions with respect to the axis of rotation of the shaft. This allows you to adjust the desired depth of the cut and ensure the stability of the tool when working. In some models, the depth of the cut is exhibited by offsetting the support relative to the disk axis.

This tool also has dust control systems, which is represented by a large cover with nozzles to which a vacuum cleaner, a container with a filter and a bag can be connected. To capture dust in the casing there is a special structure in the form of a labyrinth.

Characteristics of Stroborza

• It is noteworthy that the strokesians are usually equipped with more powerful motors, rather than similar grinders. This is caused by a larger load and the presence of a dual snap. But the borozdel themselves themselves today depending on their model vary greatly. Some of the simplest and most compact models are equipped with motors with a power of 1400 W. More powerful and productive tools are equipped with motors of 2500 or more watts. The latter have a large torque and can easily cope with large saws. The layout of the tool depending on the engine indicators may have a limiter to the diameter of the saw. Sometimes the depth of the cut and the maximum strip width is limited.
• Different manufacturers may have different instruments marking. So, the Japanese models in the marking is the size of the circle, and in the German models - the maximum depth to which the shoes can be made. Moreover, usually, the greater the circle, the stronger the engine.
• For the design of the desired size, you should select the appropriate weight tools. Powerful furrows are good when the grooves need to be done quite large, but because of their weight, they will no longer suit if you need to perform similar work on the ceiling. Therefore, such characteristics as weight, power, the size of the circle should be chosen depending on the specific task.
• The main parameter when choosing a tool is usually the necessary width and depth of the future furrow. So, for laying multiple electrical cables, a groove with a width of 20 millimeters should be enough. If you need to spend pipes, then the tool will be suitable with the ability to make a stride, the size of 45-60 centimeters. If larger grooves are needed, the groove model with one disc is taken. The width of the sticking can be exhibited, both automatically and manually stepped in the way.
• As for the depth of propyl, this parameter depends on the diameter of the tool disk. Today, the greatest depth is the one that gives 230 tooling. Some machines give a maximum depth of 60-65 millimeters. However, most of the tools can maximize the grooves in a depth of 20-45 millimeters.
• It is worth knowing about the minimum values \u200b\u200bof the groove. So, the circles with a diameter of 180 and 230 stick out behind the plane of the support platform, which does not allow to make a furrow at a depth of less than 15-20 millimeters. As we already know, the depth of propyl depends on the adjustment of the moving segment of the casing, on which the rollers are fixed.

Types of auxiliary systems

• Stroboresses have several auxiliary systems. In particular, it concerns the tools of the middle and highest price range. So, in almost all such tools there is a system for maintaining the frequency of revolutions, which is called constant electronics. When peak loads are created, the shaft speed becomes less. In this case, the system is triggered, and the tool adds power. In this case, performance is almost always supported at the same level.
• Often, the borozlodes are equipped with overload protection system, which is triggered when the load becomes greater than a certain threshold. Thanks to this, the tool does not overheat, which in turn, avoids serious breakdowns.
• Some models are equipped with a coal brush wear monitoring system, which allows you to protect the motor from breakage in case of production.
• A serious problem for each strokework is the jamming of a snap. Therefore, these tools are often equipped with stir protection. It is a conventional protective coupling. It is these devices that include a difficult situation. In addition, disconnecting electronics is installed as protection in devices.
• There is also a special system that is responsible for noise reduction, smoothness, stabilization of equipment and for reducing vibration. As such a system, high-tech clutch is often installed. The anti-vibration system is essentially shock absorbers that reduce the level of vibration.
• Some models of strokesons have a smooth start system, which is achieved by limiting the current supplied when the engine starts. This system allows you to unwind discs without a sharp jerk.
• Most models are equipped with a system capable of protecting from accidental inclusion and re-start. This increases the level of security when working with them.
• Immersion protection is the previously mentioned spring-loaded sled. When the disk is output from the propyl, they return to their extreme position, thereby closing the disk.
• To protect important parts of the tool from aggressive dust there are insulated switches and so-called labyrinth seals. Also present is the function of dusting, and the winding of the working parts of the instrument with an artificial resin, which allows protecting the internal parts of the engine.
• Sometimes tools are equipped with an additional handle that helps to protect the efforts to work correctly during operation. In addition, it allows you to reduce vibration. This is especially true if necessary to work with the material that is seriously processed. An additional handle allows you to hold the tool with both hands in the desired position. There are models of tools that this handle is rubbering, which prevents slipping.
• Many strokesons also have a spindle fixation, which is a mechanical device that holds the spindle from turning. Thanks to this, the disk replacement is facilitated.
• In the equipment, the speed is often present, which is a device that allows you to adjust the tool for processing a particular material by changing the speed of rotation.
• Many models also have a safety clutch that serves to protect the engine from the brave when the disk is encins. For convenient storage and transportation in the set of strokeware there is a special case.

Options Options

As a working body, the stroborest has a steel disk with diamond spraying. This drive is well suited for dry cut. Under the sizes of the disk, the tools are equipped with the engine of the desired power, torque and speed.

Despite its high price, disks with diamond spraying are consumables. Buy constantly such consumables are very consistent. But at the same time, you can lose much more by buying cheap replacements for a diamond circle. In addition to less durability, cheap circles have inappropriate weight and sputtering scheme. Because of this, the performance is reduced, uneven wear is ensured, which leads to imbalance and constant tool overloads.

For this reason, if necessary, change the snap-in should be chosen exactly the same, which was included with the tool. Moreover, when choosing Borozdel, it is worth learn how the sources that will be enabled in the future are.

We choose the manufacturer

Today there are several manufacturers who are engaged in the production of strokesons. Moreover, models with the same power and set of options, but from different manufacturers, prices can be different. Buying the technique of well-known brands is recommended, and it is not always expensive. Below is a list of manufacturers of technology, on the products of which it is worth paying attention.

Hilti.

This company today has offices in more than 120 countries around the world. Her products have always differed in high quality. In particular, Stroborez Nilti, after production, testing is being tested. Therefore, in the reliability of this product, you can not doubt. Stroborez Hilti is perfect for use in industry. For builders, it will be an indispensable assistant in work. Only for high quality has to pay - Hilti products have a fairly high price. Therefore, this technique usually acquire people who are engaged in similar works independently.

Hitachi.

Development power of the brand is engaged in the direction of «Hitachi Ltd». Wall Chaser distinctive feature of this brand is durable and lightweight protective case. In addition, this tool allows you to make a sufficiently wide Stroebe. These different products Hitachi. Wall Chasers this brand are characterized by a good price-performance ratio. For the price they are about in the middle price segment. Due to this, this technique is well suited for use in the home, where a lot of work, but still it is not the work of an industrial scale.

Makita

This company today is one of the market leaders in the production of power tools. It produces more than a thousand different types of products, which include wall chaser Makita. Wall chasers from this manufacturer are protected from dust and engine bearings, which increases their lifespan. The advantages of the company's products are: anti-vibration system, gear housing magnesium steel, rubberized grip, improved design and the presence of the guard guard against accidental activation. Also, included is additional handle, removable disk, you need a set of keys. All of this is in the case with the brand logo.

Bosch

Today it is one of the largest producers of electronic and electrical equipment. The great advantage of this company is the large number of service centers that allow as to repair the Bosch wall chaser, or simply order the correct part. At the time, experts of the company presented a set of inventions that have become available to other manufacturers. From this we can conclude that the company is constantly striving to improve its products. This also applies to Wall Chaser System Bosch. Bosch products is in the middle price segment. Consequently, the price of the company's Wall Chasers are among the power tools from manufacturers such as Makita and Hitachi.

It is worth noting some of the tools of Russian production - a wall chaser wall chaser caliber and bison. In any case, the acquired tool will be your indispensable assistant.

What you should pay attention to

• It is important to understand how to choose a strokesis. When choosing such a tool, pay attention to the convenience of the handle. After all, if the groove model is very powerful, modern, but it will not be convenient to sit in his hand, then this is a clearly unsuccessful purchase. The tool may have various handles - these are brackets, arcs, p-shaped, straight. In different ways, the main handles on which the control is located can be performed. In particular, there may be pens, which externally resemble the brandy device or those that resemble a drill device or circular saw.
• When choosing this tool, you must also pay attention to the direction of the work movement. For example, some gorozdelos need to push, while others need to pull. This is mainly due to the direction of rotation of the disk. Performance in both species is usually the same. It depends a lot from the habit of who they will use. Today there are tools that, thanks to the swivel scheme, you can push and pull. Such tools, for example, applies to SPARKY Stroborez.
• In addition, when buying, make an assessment of the dimensions of the purchased product. If you can connect a hose to your native vacuum cleaner, then do it. At the same time, it is necessary to see how much it will limit the movements. You should also pay attention to the cord. It must have sufficient length. After all, carrying work only interferes.
• The standard package may include not only mandatory things, but also various options. For example, a hose for connecting a vacuum cleaner, different versions of the handle. Be sure to check the tool shaft for the presence of backlash. What they will be less, it will be better. In addition, it is recommended to try the ability to set the width and depth of the cut.
• It is worth noting that some models have noise above average. In order to determine this, it is useful to listen to the work of the tool at idle.
• Strokesis has no household counterparts. After all, this tool has a narrow specialization and a fairly high price. For a wide profile brigade, a lower price-class tool is suitable, cost from 150 to 300 dollars. Such options are noisy, we cope with destination. Here you can pay attention to the Stroborez Interskol, Stroborez Fiolent. Professional installers are most suitable for more expensive brand models worth from 300 to 800 dollars. These tools are equipped with a large number of different electronics, including protection systems.