Obviously, before repair work, a large amount of preliminary measures are carried out, the essence of which is to prepare for the most primary process. Repairing often means that the situation inside the housing leaves much to be desired. The most interesting thing is that most of the time takes directly the removal of old layers of materials. It can be plaster, plastic finish, ceramic tile and much more.

The most unpleasant situation can be called urgency of all preliminary action. When on objective reasons you need to immediately carry out the repair process, it remains too little time to all preliminary actions, and first of all it refers to the removal of old layers of finishing.

Especially many problems create whitewashes, which, to great regret, takes a lot of time in this process. The main complexity is that hands are gradually starting to hurt, especially if the volume of work is large.

In this article, we will look at the best ways to relieve whitewings, thanks to which the repair process will decrease significantly, and its quality will not suffer from this.

Need to remove whitewash

• The whirlwinds itself can not create any problems if it comes to sufficiently superficial repair work. But there are exceptions in which the whims is more than a serious problem, which is clearly preventing the preparation of a qualitative result.
• Most often, problems occur when sticking wallpaper. It often happens that the owners make a decision to simplify their work by refusing to remove whitewash. Ultimately, when the glue of wallpaper dries out, the peeling process can begin, which is accompanied by a gradual overwhelming of the whitewash itself. The process of peeling will occur slowly, but actively. Practice shows that this trend will not be able to interrupt, since even when the parts are sprinkled, they will stay wallpaper, and wallpapers will continue to peel. Interestingly, that far from all the walls do that behave after sticking on the basis of blissing, in some cases there is no difficulty.
• In addition, approximately the same situation is also with other finishes. If there are many plans, then not the most reliable attachments with time can stop performing their basic function. But it happens so that the layer of whitewings is quite durable, so there should be no difficulties. As practice shows, the owners ignore the information associated with the removal of the plating layer, as it is too small, so that it can somehow affect the end result.
• Also, experts focus on the fact that any actions related to full-fledged repair are eliminated from all previous repairs related actions. In fact, in these words, the main truth is present, since even the above example about whitewashing and wallpaper indicates the serious consequences related to the repair. The removal of all layers of finishing materials is like using pure web for the artist. Nothing prevents one or another designer idea if there is a need for this.

Ways to remove bliss

• Washing water. Most often, the owners make a decision to simply wash off the layer of whitewash the large volume of water. It is simple enough, but this process also requires caution and a large number of forces (working hands). The essence of this process is that with a bottle with a special nozzle (sprayer), water is applied. After some time, when the whims begins to deteriorate significantly, another spray is happening, then one more. Ultimately, it will be possible to easily remove the plating layer with a spatula. However, practice shows that it should not spray too much water, since the excess water can create additional difficulty in carrying out this repairs itself. Accordingly, the task is to spray water in small quantities, and gradually check if there are no problems. Unfortunately, it takes a lot of time, so it does not fit for operational repairs.
• Using a soap solution. In this case, we will need a sponge on which the very soapy solution is applied. 2 tablespoons of grated soap are added to the container with 10 liters of water, as well as about 5 tablespoons of soda. Apply this solution to the surface should be carefully and in small quantities, as there is a sufficiently fast and active reaction. Again, if everything is done correctly, you can ultimately quickly remove the softened whip with a spatula. The process is long for the reason that it falls for a long time to determine the solution, as well as the expectations of the moment when the whots softened. Accordingly, this recommendation should not be used if the repair is planned operational.
• Creeping resources. To date, you can find a wide variety of products related to repair activities. Accordingly, there is a resource that is intended to wash off whitewash with their own hands. Most often it is a liquid that needs to be sprayed on the surface. Literally after a short period of time, the material softens and it can be removed by a spatula. Obviously, this method has a lot in common with two past, but it is worth it in mind that it is fast enough, but still far from the optimal result. If we have a large area of \u200b\u200bthe dwelling, then all this process will take a lot of time.

How to wash off whitewear. Preparation of the ceiling to further work

• Before you begin to remove whitewashing from the surface, it makes sense to pay attention to some preparatory actions that begin with the selection of the necessary tools. Experts recommend using a couple of spatulas simultaneously - with a narrow and wide blade. In addition, it is desirable to purchase a container with a sprayer. Such bottles can be easily found in business stores. In our case, the sprayer is the main component for removing the whitewash. Also for moisturizing the ceiling, you can use a roller, which is dipped into the prepared or acquired mixture. Of course, at hand there should be buckets with water so that it is necessary to make a mixing of the mixture if necessary, as well as the most common moisturizing.
• In itself, the process of flushing the whirlwind is quite dirty, and often he brings the most inconvenience, considering that the whirlwinds are often used on the ceiling, and when it starts to flick. Thus, it makes sense to take advantage of special clothing, as well as tools for eye protection.
• Directly flushing the blinks can create a lot of problems in the very dwelling. If laminate, parquet or any other surface are laminated on the floor, hitting it to it will affect enough negatively. Therefore, you need to arm the old newspapers or simply paper that is applied to the floor. Furniture also needs to be protected from plays from hitting, as it is later laundering it will not be easy.
• Also in front of the room where the flushing will be flushed, you should position a wet cloth, which will be able to wipe your legs.
• The room can be particularly responsible elements and items that are better, for example, to stuck with scotch, so that the plays or other resources fall in any way. When washed off whiten from the ceiling - it is better to get rid of the chandelier.

How to wash off whitewashing with newspapers

• It should be borne in mind that some methods of carrying out repair activities are known for a long time. An excellent example is precisely this option associated with the removal of whitewashing with newspapers. Unlike other ways, it is the removal of whitewash that is going on, thanks to which there is a lot of time.
• The essence of the idea is that we need a lot of old newspapers on which ordinary glue is applied. After that, you need to glue the newspaper to the ceiling and give a little time to make a small adhesion. After that, the newspaper is removed, and with it you can say goodbye to the whitewash itself. Of course, the difficulty lies in the definition of the very moment when the whits adheres well to the newspaper.
• The main plus of this method is not only in the overall speed of the process, but also in general dryness. Here you do not need to use any protective suits and points, as the whims must simply stick, leaving the surface clean and smooth.
• Of course, various remnants of glue can remain on the surface, but they can be washed with detergents and mops. This stage of work is hundreds of times cleaner than wet flushing whitewings.

Cleaner to remove bliss

• Now on the Internet you can find a large number of different ways to prepare compositions for flushing. Practice shows that not all these options are effective, but with grief in half, the owners can be solved to solve the problem.
• In practice, it is necessary to use a mixture based on water and flour, which is called Cleaster. The advantage of this mixture is that it is cheap and efficient.
• The application of the chaliper occurs with the help of a roller, all this is done evenly. After a short period of time, all this freezes, after which it can be easily removed by whipper by spatula. Unlike the classical ways to remove whitewash, only little dust is formed here, thanks to which the process is quite simple.

Budget mortar for removing whims

• When there are too few resources at hand, with which you can remove the blots, you should pay attention to a fairly simple, but effective way. We are talking about using vinegar and bath foam. The solution itself should consist of 5 liters of water, one tablespoon of vinegar and 2 small cap solutions to create a foam.
• Of course, this is not the fastest way to lose spins on the surfaces, however, it will not take too much time. After applying the solution with the help of a sponge, it is necessary to wait a short period of time, after which the winds are easily removed using a spatula, and the minimum of dust, dirt and other unpleasant moments is created.
• In addition, some people advise in the above solution to add a small amount of salt, thanks to which the whims softened even better, and the removal process will become much easier.

Washing lime blots

• Unfortunately, the limestone whims often creates a lot more problems than the chalk, therefore many methods associated with the operational removal of the blots may be unsuccessful. In the worst case, the hosts will simply lose time that in the repair process on gold weight.
• Most often, with this situation, it makes sense to use a soap solution that demonstrates the greatest efficiency. However, in contrast to the method that we described earlier, more than grazed soap should be activated to significantly increase the efficiency of the solution.
• In addition, in contrast to the method described earlier, the solution must not be sprayed on the surface, but rub the moistened with a sponge. This, again, will increase the efficiency of using the mixture, and flushing the lime blotch will occur easier. It is interesting that sense to use these recommendations for the chalk whitewash is simply not.

Traditional removal of bliss

• Despite the fact that the above recommendations often work for removing the blots of various thickness and composition, it also happens that the manufacturer contributes special components to the material, thanks to which it is almost impossible to get rid of the white layer. Therefore, it is worth considering the traditional method of this process, which, by and large, also takes not a lot of time.
• First of all, the ceiling moistening is carried out using a roller, clumsy in water, or a sprayer. In this matter, the main rule is to use a small volume of water, as it may simply be simple to drain from the ceiling, which creates many problems.
• If the surface moisturizing happened, after which the water simply absorbed into whitewash, some more water should be used. Moisturizing occurs within a small area. Concentrate should be for 2-3 square meters, no more.
• If the ceiling moisturizing passed well, then with the help of a spatula, the whirlwinds will be removed without problems, and there should be no special difficulties with the walls. It also happens that during the removal of the spam over the soldier flows water. This is due to the fact that too much water has been involved at the beginning of the process. It should be a little time so that the situation becomes more stable.
• The process should be carried out continuously, removing one section of the blots, parallel to the other one.
• Ultimately, you need to make cleaning the ceiling with a wet sponge. Unfortunately, this is quite dirty work, so you should get a special costume and glasses, which will definitely simplify the process when removing spins on the ceiling. If, after flushing, the ceiling still remains, the process is carried out again, and so until the traces of the material disappear.