Windows are an integral part of the interior of any home. They perform many useful features. For example, during the heat of the windows open in order to check the room, and in the winter they help to escape from the cold. To ensure the full functioning of the windows, high-quality fittings are needed. It is from it in many ways it depends on how long the window will last. Therefore, we will tell you how to choose the right accessories for window blocks.

Rules for the choice of window fittings

Accessories has the following structural components:

1. Upper and lower loops.
2. Compensator.
3. Safety Fuse.
4. Locks that allow you to automatically install the groove.
5. Device that provides a lift of the sash.
6. Loop amplifiers.
7. Scissor bracket.
8. Rotary-folding mechanisms.
9. Turn limiters.
10. Slit aircraft.
11. Antszel device.

You can select several basic qualities that any accessories should possess:

1. Resistance to wear. It is no secret that the windows are often closed and open quite often. One "breaking-closing" received the name "cycle". High-quality accessories should easily withstand about fifteen thousand such cycles. Therefore, before you buy window accessories, you should ask the sellers of the quantitative value of this indicator.
2. Corrosion resistance. You should not take accessories made of plastic only if you do not plan to use it as a decorative basis. Do not give preference to products made of materials prone to upholstery and seating.
3. Smooth work. This property allows you to open and close the windows without much effort. In addition, it increases the life of the accessories and prevents its full wear.
4. Aesthetics.
5. Security. It is through the windows most often the thieves penetrate the house. And one of the most popular techniques is considered to find a sash. Pay attention to the following technical capabilities of PVC window fittings that are able to prevent hacking:

• response planks and locking troughs. They have a mushroom shape, thanks to which the sash is reliably held in the retaliatory planks;
• protection of the bottom panel. This feature does not give to raise and sfing;
• overlay, which does not allow drilled handles and open a window. It is usually attached to the sash with the outside of the constipation in place of the handle;
• pen lock button or knob closed by key. Thanks to this property, the opening of the sash becomes impossible;
• sensors connected to alarm that respond to pressing attempting or opening the window. They are usually connected to the alarm;
• shut-off anti-burglar response strips and valves. Installed on the box.

Window fittings Maco.

Maco is an Austrian company that is engaged in the production of door locks, sliding, swiveling accessories. Products have the following characteristics:

1. For the manufacture of springs of angular elements, a three-layer or four-layer stainless steel is used.
2. Corner loops have a horizontal and vertical level, as well as clamping sash.
3. All elements of the fittings of this brand are processed by wax. Such processing well protects the system from corrosion exposure. In addition, it helps reduce friction between tires.
4. A special edge is installed on the outer tire, thanks to which the structures are attached to rigidity and the external and internal tires are significantly reduced.
5. There is a special connecting element. Thanks to him, the load on all parts of the system is distributed evenly.
6. Corner loops provide the same discovery both in the left and right side.
7. There is a built-in blocker that will save from the erroneous opening. There is a combination of scissors for trapezoidal and arched windows.
8. It is especially worth noting the hidden fittings, which is characterized by the fact that its components are not visible outside.

Window Furnitura Roto.

Specifications:

1. It has flat locking tongues.
2. The peculiarities of the manufacture of this accessure allow an active force on the shut-off parts when the window is closed along the entire touch surface evenly. Due to this, the closing process and opening of the window becomes much easier.
3. To facilitate the installation of the sash on the shatter or on the scissors, there is a built-in retainer. It allows you to fix the fittings in the groove.
4. The loops are adjustable in three planes. Thanks to this, you can correctly set the sash.
5. For the obstacle to the wrong closure of the sash there is a block. He allows you to unlamordly close and maintain.
6. There is a wide selection of color products.

Window fittings Vorne.

Specifications:

1. This company produces accessories that has a large number of useful features. Features of the Vorne system mechanisms allow you to use accessories both in horizontal and vertical position. Thanks to this, the windows can be installed indoors where the space is limited.
2. Provides the best density of the clamp of the perimeter.
3. It is possible on each separate section to adjust the clamp. Such tightly shocking compounds allow you to evenly distribute the load of the sash to almost all elements of the fittings.
4. A microlift is connected to the erroneous break block, which allows you to completely eliminate the opening of the sash in two positions at the same time and prevent its sagging.

Window fittings GU.

For the manufacture of fittings of this brand, high-quality steel, aluminum alloyed and zinc molded alloys are used. In this case, an innovative technology is applied to combine several layers of material, and performing all products of this brand with first-class protective properties. This is very good fittings for both wooden window frames and plastic.

Window Accessories Siegenia- Aubi

The most popular product of the company is hardware windowing Titanium (titanium having a coating) and products with a silver coating. Window accessories Aubi has high corrosion resistance. To confirm this, the properties of all products are subject to testing, during which over 480 hours were in the water-salt spray until it began to show signs of red rust. Such prolonged exposure to corrosive conditions conclusive proof quality of the window fittings. Reviews apartment owners with such windows confirm this. Therefore we can say that the products from the company Siegenia- Aubi - this is the best window hardware.

Window fittings Winkhaus

Specifications:

1. This high-quality German accessories. It is made exclusively of stainless steel, exposed galvanized.
2. There trivalent chromium coating.
3. Qualitative lifter. Thanks to him, when closing the sash is raised above the frame.
4. Reliable lock flap rotation. He does not turn the knob in the wrong direction.
5. Manual adjustment press the sash to the frame. It allows you to adjust the window without any special tools.
6. Enhanced protection from the wind. This function is provided by the lower horizontal placement of the anti-hook. This avoids squeezing sash at any wind speed.
7. Sash lock rotation. This mechanism fixed wing will not close due to the drafts.
8. Microventilation. This feature implies the possibility of opening the sash window a small slit for the purpose of airing the room. This can be used to ventilate the room, even in the winter.
9. Balcony latch.
10. Sash tilt limiter. It allows you to fix the flap in a reclined position and prevents drafts close it.

Window fittings Kale

This company - the largest manufacturer of fittings. Its products have the following features:

1. The silver coating is known for its eco-friendliness. It consists of three main layers: zinc, trivalent chromium and lacquer composition.
2. Reliable tying the swing-flap locks her loss.
3. Hardware features swing-out mounting plate. It also function as thrust bearing.
4. The hinges are able to withstand the sash weight up to 130 kg.
5. There are adjustable cylindrical locking elements or pins. They make it possible to improve the durability of the hardware. In addition, it facilitates the operation of the entire mechanism as a whole.
6. The accessories of this brand is easy and easy to adjust. This can be done using a conventional screwdriver.
7. Increased quality control. It is carried out every 15 minutes in the production process. Randomly selected products. And conducts a visual inspection, are measured by geometric parameters. The results of measurements are compared with the specifications.

How to care for fittings

Care of window fittings for plastic windows and for wooden requires the following actions from the owner:

1. Do not block the windows by inserting between the sash and the box of foreign objects.
2. Do not expose the sash excessive load. Do not hang third-party items on the handle.
3. If the wind outside, you can not leave the sash open.
4. If windows are being repaired, then in order to avoid damage, it is impossible to paint the elements.
5. Perform a regular checking for fixing the elements of the fittings and determining the degree of their wear. If necessary, the desired items are replaced or screwed screws.
6. Twice a year you need to lubricate all moving elements and locked location. To do this, you can use a special lubricant or machine oil. Only these funds should not worsen anticorrosive protection. Therefore, acids and resins should not be present in them.