According to statistics, apartment theft is the most common crime. So that the thieves did not visit the house or the cottage, you have to resort to different methods of housing. One of them is to install alarm. For those who do not want to drill holes for wires and their laying, there is a great option - using wireless signaling.

Principle of Wireless Alarm

Modern wireless alarms consist of devices that are connected by radio channels. Due to this, there is no need to lay the cable to each sensor. The sensors themselves (also wireless) are installed on the controlled territory and are connected to the central unit (control panel).

If there is a non-standard situation (fire fire, gas leakage, penetration of non-crushed guests) is triggered by a specific sensor. It transmits a signal to the central unit. The owner of the housing learns about this situation through an SMS message that comes to his phone.

To configure wireless alarm for the cottage, special skills will not need. Just need to enter your phone numbers and choose the most understandable alerts. Immediately, it is necessary to adjust the arrival of SMS notifications and in the case of the discharge of batteries, with which the sensors are applied.

In addition to light installation, the advantages of wireless alarm include:

• installation speed (3-4 h);
• convenient setup;
• lack of fees;
• the use of indoors where there is no electricity and telephone communication;
• simplicity of transfers of sensors when carrying out repair work or permutation of furniture;
• the possibility of acquiring new sensors when the old devices fails.

The "minus" wireless alarm is a false response. Often, the reason for this can be pets. In this case, a model should be purchased that has protected from involuntary response as a result of finding pets in the house.

Also, the disadvantages of the security system without wires should include dependence on the distance between the sensors and the central module. In the house, the maximum signal range is 20-25 m. This problem can be solved by mounting intermediate amplifiers.

Complete set of alarm

There are several varieties of wireless alarm with various configuration of devices. The following elements are included in the type of model models:

• control panel;
• remote Control;
• keychain;
• volume IR detector;
• mago-contact detector;
• glass break sensor;
• gas leakage sensor;
• fire sensor;
• siren.

Control panel

This element of wireless alarm for the house is the main one. Installation of the control panel is carried out in compliance with two main requirements:

• availability of quick access;
• the panel must be hidden from outsided people.

The purpose of the control panel is the implementation of a permanent connection with the other devices: sensors, lilac, control panel, etc. When interrupted communication with wireless alarm elements, an instantaneous alert of the owner of the housing occurs.

The panel is necessarily equipped with a battery, thanks to which the system backup will appear. You can equip the panel with additional modules. For example, in the case of alarm, voice alert is triggered or a SMS message is sent to a mobile phone.

Remote Control

Using the remote control, programming and control of the security system is performed. To communicate with the control panel, no wire laying is required. In almost all wireless signaling models there is a system of protection against unauthorized burglary code.

Monitoring the operating status of the battery panel is performed using the alarm itself. When they discharge, the corresponding message comes to the remote control. In most cases, modern alarm is equipped with several control panels. So it is more convenient to manage.

Keychain management

This device makes it possible to control the wireless alarm at the distance. With the help of keyfob, other structures can be driven (for example, garage doors), as well as set and remove the security alarm. Food device comes from batteries.

There are key chains with a variety of configuration and different number of function keys. It is better to purchase devices with keys that can be blocked in order to avoid an inadvertent press. One wireless alarm can be equipped with several keyfobs.

Volumetric IR detector

In fact, the IR detector is a motion sensor that responds to moving people. Thanks to specially built-in contacts, an indication of an detector and its removal of unauthorized persons is prevented.

The installation of detectors is carried out at a height of 2-2.5 m from the floor. The most optimal version of the motion sensor is on the wall in the corner of the room. This uses a special bracket. The detector itself is capable of controlling the zone, which has a radius of 10-12 m and an angle of 90-120º.

Devices are not recommended to be installed in places where strong air circulation occurs and near instruments that often change their temperature.

Magneticontact detector

This device is intended for tracking the condition of windows, doors, garage gates and other opening designs. The main reaction of the detector occurs on the removal of the magnet.

Installing the sensor is made on the window frame or door frame. Magnet itself is mounted on the window or door. In no case cannot be installed a magnetocontact detector on metal structures. This will lead to incorrect operation of the sensor.

Glass break sensor

The main function of the device is control over all windows in the house. One device is designed to protect the room with an area of \u200b\u200b10 m². To make effective control, one sensor should be placed in the same room.

Most devices have a double technology for detecting uninvited guests: by changing the air pressure and using sound waves analysis. The sensitivity indicator is adjustable depending on the distance and size of window openings.

The only nuance when installing the sensor is to be located without obstacles that can absorb sounds. Such an obstacle may be too voluminous curtains.

Gas leakage sensor

Using the device there is a quick gas detection in the air. If such a wireless signaling is equipped with additional elements, it will not only notify the owner of residential real estate on the presence of gas leakage, but also overlap the gas supply valve.

Installing the sensors is made on the wall. And the next aspect should be taken into account. If the gas is easier than air (natural and household), the device is fixed closer to the ceiling. If on the contrary (butane, propane), then the installation of the sensor is carried out near the floor.

Fireman sensor

The purpose of the device is to supply the signal in the event of a fire in the house. If the fire begins, then the corresponding information is displayed on the control panel. In most models, the sensor performs self-testing, the results of which also appear on the panel. The installation of a fire sensor occurs on the ceiling near one of the walls.

Devices are thermal and smoke. It is best when the alarm is equipped with combined optical sensors. The likelihood of false alarms in such a system is unlikely, since digital signal processing is used.

Siren

This device is an integral element of wireless alarm alarm. The undoubted advantage of the siren is that it can be installed in any room. Moreover, the alarm can be both in the form of a loud permeating sound and a pleasant melody.

Siren can monitor the operation of several devices that are elements of wireless GSM alarm. For example, one melody can be distributed when you press the doorbell button. Another melody will notify the owner of the housing on how much time has spent the outsiders who visited the house.

Select wireless alarm

Programming wireless alarm is done so that there is a continuous dialing of the owner of the housing. Moreover, it should not stop until the person lifts the handset. Setting the security system is carried out independently, taking into account the zones of the house.

In addition to the basic functions, when choosing a GSM alarm, close attention is paid to the presence of additional properties. These include:

• ability to use two telephone SIM cards;
• the presence of devices that constantly check the performance of the system;
• autonomous nutrition of all signaling elements.

The most popular models of wireless alarm in the Russian market are:

• Guard Falcon Prof;
• Falcon Eye i-Touch;
• Falcon Eye Simple.

Guard Falcon Prof.

Wireless GSM Alarm Guardian Falcon ProF is one of the "representatives" of the new generation of security systems. It can connect with any detectors. Due to the presence of a microphone, listening to the controlled zone is improved.

Alarm Guard Falcon ProF provides for a recording of three phone numbers to send SMS notifications and dialing. The security system can function with 9 zones.

The main advantages of this wireless alarm system:

• availability of SMS messages in Russian;
• no cost of phone services;
• battery solid capacity, which achieves uninterrupted system operation for 3 days without connecting to the network;
• alert for the phone owner of the housing (if the thieves try to use the cellular suppressor);
• the ability to further connect two wired zones with the installation of sensors in the lack of radio signal;
• warning of foreign people about the presence of a security system of the house (using a remote wired lighthouse).

Falcon Eye i-Touch

This security system has a standard package. The device is sold already in a programmed form. Improve the technical characteristics of the alarm can be by purchasing additional sensors.

A distinctive feature of Falcon Eye I-Touch is the possible connection of a huge number of sensors (up to 50) and remote control panels (up to 10). Despite such a solid number of devices, the signaling control is performed quite easily.

Installation of the GSM system also assumes a garter to SMS messages and calls. Moreover, the alarm can be sent to 5 numbers. The alarm function includes informing the owner of housing about low battery charge. Without connection to the network, the Falcon Eye I-Touch security system will work for 5 hours.

Falcon Eye Simple.

This model is characterized by:

• stylish appearance;
• excellent quality;
• affordable price.

The host system includes the same devices that contain other alarms. Similarly, the process of programming devices with garter to mobile phones. You can purchase additional sensors that expand the system functions.

The main features of Falcon Eye Simple:

• a large number of detectors;
• ease of controls;
• running the system after sending an SMS notification;
• ability to program 5 phone numbers;
• autonomous battery operation for 8 hours.

Acquisition of fire alarm

Wireless fire alarm system has indisputable advantages over conventional devices. The main ones are:

• simplicity of system maintenance;
• inappropriateness of cleaning sensors;
• effective functioning of batteries for 5-7 years.

Among the Russian manufacturers of wireless fire alarms, the Sagittarius and "Car" systems use the greatest demand.

Fire alarm "Sagittarius"

This model of fire alarm has the following advantages:

• replaces several devices of the usual security system;
• works with significant temperature fluctuations;
• long service life on one feeding source;
• when redeveloping the house, you can change the location of the sensors or add new devices;
• resistant to the effects of fire;
• functioning of the system when operating at least one sensor.

Fire alarm "Car"

Widely used in industrial premises and offices. The main distinguishing feature is a small cost and availability of own software, thanks to which the alarm has an effective security system.

Also, the "pluses" of the wireless fire system "Car" belongs:

• using a single card;
• simultaneous control of devices that extinguish the fire, remove smoke and notify the owner of the house;
• the presence of a modular combination structure of various sensors, which makes it possible to mount the system on any object.

Videos about nuances of using wireless GSM alarm: