To create the most comfortable conditions for recreation children in nature, in which the child will not be bored, you can put children's swings for giving. Make them with your own hands is very simple and the process will not take a long time. But the children will be very fun and interesting to relax in the fresh air.

Why is it profitable?

Installing a swing with your own hands is the right solution, because:

1. You can build any swing that perfectly fit into a particular design of the country area and beautifully complement it.
2. You can arrange homemade swings in different ways using your own and child fantasy.
3. Children will be very interested to spend time in the country and outdoors, which is very useful for them.
4. You can install a swing not only for children, but also for adults.
5. Such an addition to a pleasant pastime does not provide for large cash costs, but efforts with interest will pay off.
6. Children and swing for adults in the country or on the country site it is very easy to make with your own hands using drawings and simple household tools.

Where to install and what design to choose?

From where the swing will be located, and who will continue to ride them, depends the selection of the necessary materials, creating a drawing and drawing up the estimates.

All swings are made to divide several groups. Each of them has an individual type of design, dimensions and location relative to the Earth and skating.

For kids

1. Among the facilities that are made for children, there are many different options. Street swings of this category are with a frame or without it, as well as may also have the appearance of only seats with a suspension.
2. Designs that have a form of a small chair or "boat" are possible.
3. For young children, the facilities with frames are best suited. If the child is still quite few years, then the swing necessarily the presence of seat belts that will fix it and will not allow you to fall.

Family

1. Such models for recreation swing are characterized by large sizes. Most often they look like benches, with the backs attached to them of different heights.
2. More than 2 people can be placed on such configurations.
3. Same swing such a form should be attached to a strong frame. It usually has a p-shaped form. If you welcome the coast on the crossbar, then on the swing it will be possible to ride under any weather conditions.

Portable

1. Swing from this category are designed for attachment in the indoor room.
2. This refers not only the house, as well as a gazebo or veranda.
3. Such configurations are convenient in that, if necessary, the frame can be removed and moved to any other place.

How to choose Material: Rules

1. In order to put out street places for children entertainment, you must first think about what materials they will be made. It is important here to correctly appreciate your strength, to understand the swing of which configuration will be practical to be operated in your conditions and it will be quite possible to establish yourself.
2. If a choice is made in favor of children's metal swings for giving, remember that such structures are fundamental for the site. When installing forged models, it is important to know the peculiarities of the behavior of the metal depending on the changing external conditions. To install street swings from this material, you need to be able to draw with a hacksaw, a grinder and a welding machine.
3. For those who are not confident in their forces in the installation of metal swing, another option is suitable - models made of wood. In addition, make children's wooden swing much easier.
4. With natural wood, it is much easier to work, as it is well handled. Therefore, even inexperienced households who have elementary ideas about working with tools will be able to build wooden structures. The main thing is to choose good and durable wood. Perfect for the construction of swing array of oak, ate, birch and cedar. In this case, the material must be processed carefully. The truly comfortable and safe swings will be obtained only if there are no irregularities and flaws in the form of bitch or recesses.
5. Less quality of children's street swings for giving from plastic materials. Their main dignity is that their construction will cost enough. However, it is necessary to understand, stopping in this embodiment that such a material is not environmentally friendly. Also, if the swing is designed not only for children, then due to the fragility, it is better to give preference to other materials.
6. These materials are the most popular, but not only of them you can make good swing for children on the household plot. For their construction, you can use a lot of healthy items.

Simple street swing designs

Pallet

Pretty good mounted swings are obtained from wood pallet. If after the end of the next construction work remained a pallet from under the materials, then it is perfect for the design. We will analyze how you can make a swing, for example, nursery, do it yourself.

1. To build it, we will need a rope and a tree on which the swings will be located.
2. They must be equally strong in order to ensure safety. In the absence of such a reliable consolidation, you can independently wrap in the right place the support poles.
3. One of the easiest ways to create such a design is the attachment of one end of the rope to the pallet, and the other is to the support.
4. Next, you need to start fantasy. With its help, the design itself can be finalized and improved. It turns out well, if you make a couple of palace and make a comfortable back. There will be much more convenient for such a swing.
5. You can also decorate them with drawings. It is best to entrust it to children - they will be very interested in doing such creative work.

Skateboard

1. As a seating for swing, the upper part of the broken skateboard is well suited. On the appearance of the board seems fragile and not sufficiently resistant, but, nevertheless, it can withstand quite large loads. Therefore, it can become excellent, and most importantly, comfortable seats. It is only necessary to build as much as possible support as possible and consolidate the board so that it can not slip out of the rope loops.
2. If the mounts for the wheels remained, the manufacture of the swing becomes even easier. From four sides, it is enough to wear ropes and tighten the rope and tighten.
3. Such a design is considered more convenient and can safely hold the board. Slip ropes will not be, so the street swing will be very stable and safe for children.

Tires

1. Making swings using tires, too easy for an inventive owner.
2. First, it is necessary to wear a support with a transverse crossbar in the form of a bars from a tree or metal.
3. In the board lying along the board, you need to screw the bolts to which then attach special rings.
4. Now one end of the thick rope is used in the rings, and the second is attached to the tire. Instead of ropes, you can also use metal chains with a large fastening.
5. If a tree is used for support, then the process of their manufacture will accelerate significantly.

In addition to all the above-listed means for the construction of the swing, others can also be used. Among them are bars, seats from furniture chairs or an old chair, logs, planks and many other household appliances. If you use fantasy, you can make beautiful street swings from any material.

Make a frame-bench: instruction

1. Swing-bench will allow you to accommodate several people at once. This option is very convenient and practical for recreation by small digging. Not only adults will be able to spend fun on them, but also children too.
2. For its construction, you can use a variety of materials. The choice of the width of the seat and the height of the back, which will be comfortable to lean, depends on its own preferences. The most important thing is comfort. If the bench is quite convenient, it will be nice to relax on it.
3. When they are installed for support, you can use a large tree branch or to build a base with the presence of a transverse beam.
4. Make a skateback bench very simple. Need to be well treated wood. It is a reliable and strong material and withstands a fairly large weight. It is worth the raw tree not as expensive, so the construction of such a swing will be quite cheap.

What is necessary

1. From the wood we will need:

• 15 2.5 m long boards;
• 1 board is the same length, but only a little thicker.

2. In addition to wood, you also need:

• self-tapping screws of two different sizes: 80 x 4.5 mm - about 40 pcs.;
• self-tapping screw 51 x 3.5 mm - about 180 pcs.;
• carabins - 6 pcs.;
• screws with rings -12 x 100 mm and 12 x 80 mm - 2 pairs;
• the welded chain - its length is determined on the basis of the height of the swing itself.

3. Metal elements can be both contrasting and combined with wooden parts in color.
4. Tools need not too much:

• plane;
• lobzik;
• drill;
• a circular saw.

5. Other things:

• simple pencil;
• yardstick;
• corolnic

Sequence of making swing-benches

1. From the harvested array, you need to cut off the boards of 1.5 m with a saw, leaving the corners with straight. In the thickness they can be about 20 mm.
2. The layer of material for the back may be no less than 13 mm. The seat will take 17 equalized boards of 500 mm each, and on the design of the back - 15 mm.
3. Now drill holes from 2 mm in a depth, designed to screw the screws with a thin drill with a drill.
4. In order for the bench to be conveniently sitting, parts of the base with the planets fastened on them can be made figure, and not to leave straight. For the manufacture of these slats, a board with dimensions of 150 x 50 mm are needed. The result will be 6 parts for the manufacture of the frame.
5. Now we select the optimal angle between the seat and the back, and then fix the planks, leaving the same spaces. First we connect the end parts of the parts, and then their middle. So parts of the design will be combined into one frame.
6. For the facilities of the armrests we will need a bars. Their width is not too important, so we take any. They need to be fixed on one side on the seat, and on the other - on the part of the frame, which is located on the back.
7. Rings attached to the screws are best connected at the bottom of the armrest. Be sure to be needed washers that will not allow nuts to enter the tree through. The same rings must be attached to the transverse crossbar, on which street children's swings will hang.
8. Now we attach chains to the rings using the Karabinov.

Construction with a supporting structure in the form of the letter "A"

To build such a street swing, you will need the same materials as for the previous one.

Production sequence

1. First you need to determine the angle under which two vertical parts will be interconnected. It will depend on the width of the seating of the swing. The more wider, the more you will need to make an angle.
2. Vertical bars need to be copped using bolts. So the design will be more reliable.
3. So that the base is fixed more confidently, the beams need to be combined with a cross-board. It is necessary to arrange it at an altitude, approximately equal to the third of the length of the support from the Earth. They must be parallel to each other.
4. As mounts for details, you can use corners that are attached by self-draws. The crossbars can be placed in different places, for example, one of the construction, and the second - for a tie is slightly lower. The presence of two connecting boards will make the design more reliable.
5. On the inside you need to build special lining, which look like a trapezium, and to attach a transverse beam to the racks.
6. The whole design must be laid in the ground. For this prepare 4 recesses about 1 m depth. Switching linings are placed at the bottom, and then the poles are inserted into the pits and poured concrete.
7. On the finished support, you can mount a variety of swings, designed for various weights by weight. Such a support will perfectly keep children's suspended swings for giving and other popular views of these designs for recreation.

Production of swing for the smallest

1. For kids, you can make a swing a little more complicated. For example, the karapuses will be delighted with a children's slide with swings. Of course, you can order on the Internet inexpensive children's swings with the presence of a slide for the cottage, but it will come up with your own hands much cheaper and more exciting for you and a child.
2. The easiest to use an array as the main material. With the help of logs, it is very easy to make a ladder. The slide itself can be made of both wooden boards and plastic. The most important thing is that it is reliable to bore everything so that the kid does not suffer during the game.
3. Another interesting option is children's swing with sandbox that are most suitable for giving. Using the imagination, you can come up with a fairly interesting location, design.

Important aspects of making swing for children

1. When installing the swings, it is impossible to forget that in the first of all they should be as secure as possible for you and the child.
2. Each wooden part should be carefully processed using sandpaper from knots and wood roughness.
3. Using a file, you need to take care of the elimination of sharp corners, which are easy to hurt not only to children.
4. In order for the design to be strong, we must not forget about its processing with special varnish coatings, paint, impregnation, etc.
5. Zinc fasteners will be extremely useful in terms of preventing the inner destruction of the tree.