Despite the fact that the whols are an environmentally friendly material, in the apartments are more and less common ceilings and walls. The disadvantage of the bliss is the need for repair every 3-4 years.

There will be advisers who will explain how to break the wallpaper on the whitewash. You will advise you to strengthen the layer of blaming the primer, handle the wall or ceiling by concrete contact, or stick a trial piece of wallpaper.

Using modern primers and adhesives, you can shove wallpaper on a whitewash. On the whirlwind, you can put it, plaster, glue ceiling and even ceramic tiles. You no longer forbid it. The question is different - how long the finish coating on a poorly prepared surface will last.

If you are a lover of frequent repairs - boldly coolness wallpapers on the whitewash. Six months later you will do something.

Why you can not glue wallpapers

Particles of chalk or lime blots have a very small fraction and practically weightless. When applied to the surface to the surface, it is kept due to the strength of the surface tension. After evaporation of moisture, the whitewashes dares to the surface and remains smooth coating. The plain layer can be compared with the layer of dust - it is enough to spend your hand on the ceiling and chalk will remain on the fingers.

Teaches are not able to withstand additional load. Under the weight of the wallpaper, it will depart from the surface. Wallpapers are not separated from the blots - they are spilled along with whitewash.

The primer does not penetrate the plating layer. Obcomers are especially poorly wetted - it has water-repellent properties. After applying the primer, it seems that you managed to strengthen the whitewash, because it does not smear anymore. In fact, the primer forms a film on the whitewash, but the clutch of whitewings with the surface remains the same.

In addition to the primer in the store there are special impregnations for blissing. The seller will assure you that the miracle impregnation tightly glues whiten to the ceiling. His task is to sell the goods, your task is to beat the wallpaper efficiently. Do not discard extra funds. The impregnations come into a chemical reaction with whitewash and yellow divorces appear.

How to clean the surface from whitewash

Cleaning the ceiling from blotch The occupation is dirty, but simple. Ceiling plates are smooth, the glasses easily leave them.

1. Cover the furniture with a film.
2. Shipping floor with newspapers.
3. Moisten the whitewash with warm water with a wide brush with natural bristles.
4. Spatula squared packed from the ceiling.
5. Treat the ceiling by universal acrylic primer.
6. Collect garbage and rinse the floor with warm water with the addition of vinegar.

Very often whitewash with chalk putty. If the putty is firmly held on the stove, leave it on the surface.

Completely completely remove whiten With a rough wall. With low-quality repair, the whits are often applied to the plaster layer without putty. Packet particles fill the recesses in the upper layer of plaster and removed with difficulty.

1. Moisten the wall well.
2. Remove the top layer whipper spatula.
3. With the help of a brush or sponge, smear the rest of the whitewash. The foam sponge quickly comes in disrepair. It is more convenient to operate a rigid clothes brush with a handle.
4. It is impossible to completely wash off whitewashing. Scroll through the wall to strengthen the remaining bliss.

What to do when you don't want to remove

If you have minimal requirements for the quality of repair and want to refresh the room in one day, try to go around the walls with woven on the whitewash. Cheer the ceiling at an unprepared surface - a waste of time.

When applying glue, paper wallpaper turns and become wider. In the process of drying, the wallpaper is compressed and acquired the initial size. The greatest load falls on the edge of the wallpaper, so they diverge on the seams. When an unprepared surface of the band should be sticking to the brass.

1. Remove the pavement around the room perimeter by 10 cm from the ceiling and floor.
2. Clean the corners.
3. Apply a deep penetration into the wall.
4. Divide the glue and cut the wallpaper.
5. In the course of the work, wrap the corners and the top of the wall with PVA glue.
6. When working with wallpaper on a fliesline basis, apply glue on the wall. Paper wallpapers Loop glue and roll up for 3-5 min for swelling.
7. Wallpaper. So that the seams were less noticeable, start glue the sliced \u200b\u200bstripes from the window.

How to work with liquid wallpaper

Liquid wallpaper require careful surface preparation. The mixture is applied with a smooth or spraying method.

Attempting to apply liquid wallpapers on the blotch will lead to deplorable results.

• It is not enough that the wallpaper will not be firmly held on the wall, their color will change from the blots and spots are formed.
• When applied with a mixture with a smooth or grater, the whirlwinds will dyate for liquid wallpaper, and mixed with the components. The mixture will be corrupted.
• When applying liquid wallpapers from a pistol, they will crawl off the wall, the mixture will not hold the mixture.
• The remains of lime blots will give an unwanted chemical reaction, which will also lead to the appearance of spots.

Is it possible to beat the wallpaper?

Paper wallpaper is splamening from the blots and start bubble.

Special wallpapers are not produced. You can whitewashing close or smooth wallpapers for painting on a phlizelin-based basis. Such wallpapers are not afraid of moisture.

• Make sure the wallpaper is tightly glued to the ceiling.
• Divide the chalk whitewash and straighten it.
• Apply the first layer of whitewash with a roller or sprayer.
• If there are spaces after the first layer, pass the wallpaper once again with a sprayer whirlwind or use the brush.
• Do not apply the second layer of whitewash the roller - the firing layer will replete and plunges behind the roller coat.

The correct preparation of the walls to the salary of their wallpaper will save you from the need to make repairs repairs in half a year.