The house where the doors from the tree are installed, always wins the room in which the advantage is given to the plastic. Therefore, after buying or independently manufacturing a wooden door, an important moment of its installation is in place. There are clear rules and the technology-tested technology for installing wooden doors.

Some differences between entrance and interroom doors

All doors that are installed in the house or apartment can be divided into three types: interroom, entrance and balcony. It is clear that the entrance doors should be much stronger, thicker and warmer, because through them, the room often contacts directly with the street. To the entrance doors, however, as to balcony, also additional tightness requirements are presented. However, the installation of wooden doors in different parts of the room is almost no different.

Preparatory work before installing the door

Before put the door, it is necessary to produce work on the arrangement of the place where it will be installed. For this, the master must prepare all the necessary tools, materials and a door frame. The door frame is usually done separately, and sometimes the door is installed simply to the place of old. The box is sliced, polished and painted, or is covered with varnish. Installation of doors in a wooden house does not differ from the installation of doors in other types of houses, so the most important thing here is to know the right technology and master it perfectly.

Installing a wooden door with your own hands

So, the stage of installation of the door comes. It is important to comply with the sequence of actions. Initially, the electric cutter or the chisel must prepare a place for door loops. From the edge of the top loop directly to the edge of the door web, there should be a distance of 200 mm. A similar distance is observed for the bottom loop. Then, the preparation of the elements of the box is carried out using a hacksaw or circular saw and stub (the device for trimming the edges of the board under the desired angle so that they are smooth and correctly docked). The side details of the box are trimmed at an angle of 45 degrees. Further, the side vertical part of the box, which will be located on the side of the loops we apply to the door and place those places where the loops on the jamble will be attached. It is necessary to leave a gap from above the door is 3-4 mm. On the bottom of the door, the gap is left 10-15 mm.
Installing the inlet wooden doors continues to drink the groove under the loop. This is done with the help of the chisels or cutters. The loops are invested in the deepening on the door just carved by the chisel. Then, the drill, exactly on the looping holes, both in the box and on the door of the door, drill special holes for self-tapping screws. This completely eliminates the cracking of the wood when screwed screws into it. It is important to know that the diameter of the recesses must be less than those screws that will be used when mounting the door. Then the hinge attachment takes on to the door leaf with self-draws using a screwdriver.

Installing a latch lock

To do this, the door is turned over, and on the opposite end, at the level of 90-120 mm with a drill with a large diameter drill make a hole to install a latch. By inserting it into the drilled hole, the pencil marks the exact form of the future groove designed to secure the latch in the door. Then, with the help of a cutter or a chisel, a deepening is made, in which the front strip of the latch will be placed. After that, the valve is inserted into the recess so that its upper or facial plank does not speak at all over the surface of the door leaf. The valve is pulled out of the door of the door in order to outline the places where the holes for the handles will be drilled. Next action - drill these holes. The latch is inserted back - in the recess made for it and is screwed by self-drawing. Pens and decorative linings are also screwed on both sides of the door.

Installation of boxes

Manufacture and installation of wooden doors process difficult, and therefore consists of several stages. One of them is the assembly fixture and the jamb of the door frame. After the edges of vertical and horizontal elements of the box have been cut to miter box at 45 degrees, they are drilled through holes. They are made in the end part of the element box. The holes will allow quickly and securely fasten the door frame even for one person. When all the elements are produced and fitted box height and width of the doorway, they are placed on a flat surface in the form of the letter "P". Directly through pre-drilled holes all parts of the box are joined together with screws. Video installation of wooden doors will help anyone, especially the novice webmaster to put the door on their own.

Once the box is assembled, it can be mounted in the doorway. For this box is applied to the point of attachment and where there are slots for hinges, drilled two holes for securing the box to the wall. Then, put in the box aperture and fastened vertically at the top by means of dowels or large-tapping screws to a wall. Applying level works to ensure that the box took a strictly vertical position relative to the wall. Then fasten the lower part of the box in a similar manner. Very important next point between the frame and the wall be sure to leave a gap, into which are inserted wooden wedges. This will give an even greater stiffness of the whole structure. Then continue to mount the box to the wall until it stops. The cost of installing a wooden door with this technology is minimal, so every handyman can afford it easily afford.

hanging doors

Hinged door with screws. Hinges at the same time successfully closed head of the screws by means of which was attached to the wall box. After this stage to verify the correctness and accuracy of the hanging door. You can do this several times to open and close the door. If properly attaching they should not be opened or closed itself. Next, fix the upper part of the box wooden wedge that it has acquired the maximum hardness in the doorway. Installation of wooden doors price not much different in regions of the country, so this option is available to all people who have a desire to put in your home, such doors.

Installing the locking bar on the box

To do this, the door must be closed and on the box, exactly opposite the latch makes a pencil mark. Further, an opening is drilled in the marked place. It must accurately coincide with the head lever. Then the door closes and checks the accuracy of the coincidence of the basement and the hole in the box for it, opposite the hole in the box for the basement between the box and the wooden wedge is inserted - for rigidity. Further, through the box and wedge, the hole is drilled, which screws up the self-tapping screw. Thus, after installing the shut-off strip, the selflessness will not be visible, and the box will attached to the wall quite firmly. Installation of a wooden entrance door. Price does not play a big role when the master has the necessary materials and all the necessary tools.

Final stage installation door

At the end, the master checks the magnitude of the gaps directly between the door and the box. If everything is normal, then the final fixation of the boxes to the outlet with the help of wedges is happening. Then, on the inside of the doors, the space between the door frame and the wall is neatly filled with the mounting foam. If it is an entrance door or balcony door, then it must be done. So the door mount will be even stronger, and thermal insulation is better. After applying the mounting foam on the front side, platbands are attached, and the inner side of the junction of the box with the door is placed and covered with paint. Installing the second input wooden door can be made on the same plan.