Vibroplitis is a building tool that performs tamping work. With this device, coatings of gravel, rubble, concrete or sand are sealing. On the nuances of choosing these devices, components, the scope of application and the best producers is described below.

Scope of application vibratinglitis

Purpose of vibrating plates - the rambling of coatings from bulk materials. Therefore, the scope of their use is very wide. Such a mechanism is compared with a miniature rink of asphalt paver, mobile and easy to use.

Vibroplita may fail:

• asphalt,
• gravel,
• sand,
• lawn.

It is used to seal the land under the foundation tab. The most wide scope of the use of vibrating plates is the arrangement of roads and sidewalks. It is equally well coping with asphalt and paving slabs.

Scope of vibrating plants - repair work and construction on an industrial scale or in private sites, arrangement of sports grounds, parking for cars, roads, sidewalks and a lot of other. Especially convenient such a mechanism for owners of private houses, which ennoble the house and adjacent territory independently.

Device vibroplites

The device of the vibrating plates is sufficient, as well as its use. The base of the mechanism is a stove of steel or cast iron, in the center of which is the vibrator. The vibrator betrays oscillations on the stove and it fulfills its purpose - the surface will be covered with these oscillations. The driving part of the mechanism is the engine that transmits the rotational motions of the vibrating part through the coupling and the clinorem. Already in the oscillatory mechanism in the stove, these movements turn into oscillatory. The basis that keeps the entire mechanism assembly is a frame.

Engines for fuel type vibrating plates are divided into:

• electrical
• petrol
• diesel.

Motors that consume gasoline and electricity are the most popular. Lack of diesel engine - its price. Electric - the impossibility of performing work in the absence of a power source. Given all these factors, we can safely state that the gasoline engine wins in all respects.

Characteristics of vibratinglitis

Vibrating plates are characterized by the following indicators:

• mass of the mechanism;
• vibration effort;
• work surface size;
• engine type and its power.

Mass, effort and size of vibrating plates characterize the quality of the seal issued by it as a result. The ease of performance depends on the power of the motor - the lower the power, the greater the effort to be applied to the ramp.

By mass of the mechanism, all models are divided into:

• lungs - up to 75 kg;
• universal - from 75 to 90 kg;
• medium-free - from 90 to 140 kg;
• heavy - from 140 kg.

For different types of work, a mechanism with a different mass is suitable. The effectiveness of the use of vibrating plates by 70% depends on the correct selection of its weight. The remaining 30% defines the vibration force, the size of the surface and the type of engine.

Vibration force - the power indicator of the jokes transmitted from the vibrator to the stove. The more this indicator, the more dense materials it will be able to ravibly. The size of the working surface is the pressure indicator per unit of the plane processed. The smaller the working surface, the greater pressure on one unit will create a vibrating plate when working. This ratio coefficient should not exceed the figure of 0.3. Consequently, the smaller the working surface, the more efficiently copes with its task mechanism.

It should be noted that the operating surfaces are also characterized by the type of material used - cast iron or steel. In this context, the vibrating plates with the cast-iron base is much more effective, since the area of \u200b\u200btheir working surface is less than that of the models with a steel base.

The power of the engine has no less important. This indicator determines the ability to move along a viscous surface under a slope. When you start the vibratinglitis, it itself pulls itself forward without requiring additional effort. If the power indicator is low, the stove will drown in the ground and break on the lines. Output: The greater the engine power of the vibroplitis, the better it will cope with its task and the less effort will attach the man manager for this.

Instruction: Vibratinglitis and criteria for its choice

The most important parameter for which the vibroplite is chosen is its weight. In this question, there is a clear classification that should be learned carefully and detail:

1. For work on the arrangement of the landscape, laying tracks from small soils with a thickness of up to 15 cm, for laying paving slabs, configuration of sidewalks by damping polyurethane mats It is advisable to use light models weighing up to 75 kg.
2. For landscape works, snack repair of pavement from asphalt, repair of road surfaces after laying engineering communications, for work on the soil layer, no more than 25 cm uses vibrating plates, which is recommended with weight from 75 to 90 kg.
3. For tamping the bases of the extravagant roads, sealing the backfill of trenches around the perimeter of the foundation, to repair the road coating from asphalt, work on the soil with a layer thickness from 25 to 60 cm is used by vibratory products - from 90 to 140 kg, or severe - from 140 kg. To perform work on sealing asphalt, the weight is selected in the range not exceeding 100 kg.

The following selection criterion is a vibration effort. This parameter determines the degree of coating seal. If the choice is between two plates with the same weight, and the priority is the highest density of styling the surface being developed, then your choice should be stopped on the one that has a higher vibration force indicator. In models from a group of light mechanisms, this indicator does not exceed 10 kN, they are not suitable for asphalting. For laying paving slabs optimally suitable models with weight from 75 to 90 kg and 18-20 kN vibration force. If these indicators are higher, the vibratinglitis will not put the tile, and the latter in the soil is more necessary or even breaks.

The size of the working surface has already been mentioned above - the smaller this indicator, the greater the seal gives the mechanism. Choosing among models with the same indicators of engine power, vibratory effort and weight, it is advisable to stop your choice on that machine that has a smaller work surface size.

The following selection criterion is a type of engine for gasoline consumed. Models with different power sources have the same indicators in other criteria, because the type of fuel performed is not affected by the work. But each of the three types of engines has its advantages and disadvantages:

1. Vibrating plates with a gasoline engine are considered the most convenient and advantageous option. The mechanism itself has a relatively low price, with a gasoline engine demonstrates a high power indicator and a low noise level. The price of these models is relatively low, and they work in all conditions, since they do not require the presence of a permanent source of electrical power supply.
2. Devices with diesel engines did not receive such popularity as gasoline. With constant work with the vibrating plates, the owner saves fuel, but the initial price of the mechanism itself is significantly higher than the model with a gasoline engine. The profitability of this purchase can be defined individually, based on the amount of alleged work. Another significant disadvantage of diesel vibrating plants is a high noise level during operation.
3. Electrical vibrating plates have a narrow scope, as it is determined by the length of the electrical cord. It is worth abandoning the acquisition of this type of device, if it is assumed outside the area of \u200b\u200baccess to electrical networks. Significant plus models - relatively low price. Having absolutely identical indicators, vibratinglitis with a gasoline or diesel engine is an order of magnitude more expensive than electric.

The last criterion for which the choice is made is reversing cars or having a direct move. Reversible vibrating plates have a reverse, in this its significant advantage over models with direct moves that need to be freed often. Such an inconvenience increases the time of work and the physical costs for them. Reversing models are indispensable when performing work on planes with a small area - trenches, pitted, foundations of low-rise buildings.

What to pay attention to when buying

The above describes important criteria based on the choice of vibrating plates, but there are some small nuances that make it easier to work with this mechanism and making it more durable:

1. The base material is preferably cast iron, as it has a low degree of wear.
2. Wheels for transportation - their presence is not necessary, but facilitates the transportation of the mechanism.
3. The ability to fold the handle is a convenient addition, which also facilitates transportation.
4. The presence of an irrigation system is mandatory to perform work on laying asphalt, otherwise the slab during operation will stick to hot coating and will create additional inconvenience.
5. The belt casing - the belt and clutches must be covered with a belt completely, otherwise the likelihood of entering the mechanism of elements of the sealing surface is high.
6. The integrity of the body of the vibration mechanism and the base of the vibrating plates is the absence of bolts and compounds makes the mechanism more durable.

Review of the countries of the manufacturers of vibrating

In the market, the vibrating plates are presented by models of various countries of the manufacturers, among them it is worth highlighting the most sought-after:

1. Vibrating plates from Germany. This product has an inexhaustible margin of safety and reliability. They can be intended for both private use and industrial purposes. In the rental of the vibroplitis of German production, it is possible to take without fears, since all mechanisms are designed for a double stock of cycles.
2. Vibrating plates from Israel, Spain and South Korea are also often used for industrial applications and large buildings. Excellent showed themselves in difficult conditions, the work resource is slightly lower than in German technology. But below and the price, this indicator is 30-40%.
3. Vibrating plates from Russia show a high level of reliability, do not inferior in it with Spanish, Israeli and Korean models, are at about about equal to them. Minus Russian models - technical solutions and convenience of operation are considered not so detailed as in the categories described above, which creates some inconvenience in the work.
4. Vibrating plates from China have only one advantage - low price. Otherwise, they confirm the statement that good cannot be cheap. Acquire them in the event that the device is planned to be used often. 4 Chinese brands of vibrating plates - Tekpack, Masalta, Dynamic, Cimar deserve attention.

Overview of trademarks Vibroplitis

Among the entire model range of vibrating plates from the above-mentioned producers, there are models that deserve special attention:

1. Wacker, Weber, Ammann, Bomag from leading manufacturers in Europe. These models belong to the professional class, demonstrate a high level of reliability, quality of work and ease of use. Maintenance requirements are minimal, maximum safety margin. The price of models starts from 1200 EUR.
2. Shatal (Israel), Jeonil Machinery (South Korea), NTC (Czech Republic) - the highest reliability class, excellent functionality, compliance with rigid use conditions. The first class mechanisms are inferior in the strength of strength. The most affordable at the price of this list are models from the Korean manufacturer JEONIL MACHINERY - from 1100 EUR.
3. Russian brands Splitstone, Motoperom and SZPO are highly reliable devices that are not inferior from the functionality and convenience of the second category. The price of these models begins from 850 EUR.
4. Chinese, as already mentioned above - Tekpack, Masalta, Dynamic, Cimar, the price of these models starts from 500 EUR.

Stop list - not recommended for buying vibroplitis

In models with a relatively not high cost, you should pay attention to the power of the engine in relation to the weight of the slab. Vibroplitis, the price is not high, while the diesel or powerful electric motor is installed, in 99% will need overhaul. Manufacturers are installed on the mechanism of a low-power engine. Such a stove does not correspond to the productivity that its weight should give, because due to the weak engine it is drowning in the ground and makes applying an additional force when working. This aspect is especially important for plates with a weight of more than 100 kg. An example of weight inconsistencies and power is a model with a 5-6 hp engine. and weighing 150-170 kg. Such models of vibrating plates have a very attractive and low price, but do not fulfill the tasks in proper quality and for purchase are not recommended.

Not recommended for the purchase of used goods or vibrating plants. This is due to the fact that most of the details are worn and need to be replaced. As for new models, the market is flooded by trademarks, which are issued for European, but at the same time have a very low price, it is not recommended to buy them.