Panels Leaf PVC are inexpensive practical building materials. Thanks to the wide range of colors, they allow us to implement various design fantasies.

Decorative PVC List Panels: Views

1. Laminated.

The front side of such panels is covered with a special decorative film that protects material from various kinds of influences.

2. Painted.

They are plates made of colored PVC. In the process of production, a dye is added to them, painting the panel for the entire depth.

3. With offset printing, flexography.

The decor of such panels is carried out on a special printing machine. Paint is applied by rolling.

4. Curmody.

The drawing on such products is applied under the action of high temperature using a certain paint.

Features of sheet panels

1. PVC leaf panels, which can be cheap in any construction store, are divided into 2 types:

• ceiling (can be mounted on the ceiling and walls. They differ fragility and subtlety);
• wall (thicker and heavy. For the installation on the ceiling is not suitable).

2. For interior decoration, any types of panels can be used for external - it is desirable to use single PVC, which is resistant to ultraviolet, high humidity, temperature fluctuations. The only one, it does not accept mechanical damage.

Advantages of PVC leaf panels (photo)

1. PVC leaf panels for the bathroom have increased resistance to moisture, do not require special care.
2. It is possible to use building materials in any room (toilet, shower, etc.).
3. PVC leaf panels for the kitchen are an excellent choice for those who appreciate practicality and want to save on the finish.
4. Such products have a wide range of colors and type of coating.
5. PVC panels are produced in the form of a rectangular sheet, which is perfectly cut.
6. Installation of this building material can be carried out with your own hands.
7. In the manufacture of panels do not use substances harmful to health.
8. To give the desired color, use water-based paint.

Secrets of the installation of PVC leaf panels

1. It is necessary to strictly observe the procedure and make calculations in advance.
2. Before installation, you should withstand the panels for 2-3 days indoors at room temperature.
3. Marking for the socket, various accessories need to be produced in advance.
4. Cutting panels should be carried out by electro-bills or hacksaw. Orthodox remove the plane.
5. The basis of the panels can be MDF, DVP, plasterboard, polyvinyl chloride, etc.
6. Leave gaps for possible expansion of panels. The height of the workpiece must be 1 cm less than the distance from the ceiling to the floor.
7. When using hacksaw for cutting panels, make sections from the side of the decorative coating. When working with Circular saw - from the base side.

How to glue PVC leaf panels

Progress:

1. Prepare the foundation:

• clean the pollution;
• remove the remains of the old coating;
• align the surface with a putty;
• walk out the sandpaper.

Notes:

• it is possible to fix the leaf panels with the help of a universal construction, silicone neutral, acrylic glue;
• starting installation follows from the inner corner of the room, then around the perimeter. It is not recommended to go close to the sheets - provide gaps of several millimeters. In the future, they can be filled with silicone sealant;
• leave the same gaps at the joints of building materials with corners, doors, windows;
• the adhesive composition is applied to the entire surface of the finishing material.

2. Fill with sealant plastic profiles and install them on the edges of each sheet. After that, press with the panel force to the wall and pull the hammer.

3. Cut the wooden temporary support to the sheet to better fix the building material.

4. Remove the extra sealant, secure additionally sheets with nails or screws.

Notes

If the repair is created in the room with uneven walls, the panels should be installed on the crate. Secure on the surface of wooden bars with screws with a step of 0.5 m. Then proceed to fixing the decorative building materials using a construction stapler or a different fastener.