A good sauna is an indispensable attribute of the cottage or country house, besides, it is useful for health. It offers indescribable sensations after pouring themselves with cold water, but this is not the only bath procedure.

In order to comply with their hygiene, before and after visiting the steam, it should be disappeared and, naturally, it requires quite warm water. Water can be heated at home and then deliver it with tanks into the bath, but this is not the most optimal solution. The water heater will also buy a practical and efficient way. The equipment market has a wide range of various devices that differ from the heating source, appearance, level of automation, materials, water heating principle and location. Therefore, before proceeding directly to the selection, you must first determine the type of water heater for the cottage.

Electric water heaters

Electrical units have a built-in electrical heating element of a certain power and only one outlet is needed to connect it in the bath. Wars water such a device is not fast, but it remains warm for a long time. Electric water heaters are relevant used for a Russian bath or sauna. They are in demand and popular at the expense of a wide variety of models with different volumes.

Cumulative type

The accumulative water heater is the most convenient and reliable solution to the problems associated with the lack of supply in the bath of hot water.

Such aggregates have distinctive features.:
1. Large volume of hot water supplied, but it is required to warm it up.
2. Simultaneous hot water supply to several points consumed.
3. The liquid is warm to high temperatures with its subsequent maintenance.
4. Do not have special requirements for the reliability of wiring and voltage power.
Minus is that they can occupy a lot of space; Water from the accumulative water heater is not used for cooking, and the need to preheat hot water, and this in turn requires some time.

Flow-up

If the use of hot water is not big, but you need to have it in the bath without delays and constantly, then the best options are the flowing electric water heater.
His main advantages:
1. Compact and easy to work.
2. Provides an unlimited amount of hot water.
3. Does not need constant maintenance.
4. Water does not lose as heated and small cost.
The disadvantages include:
1. Issuance of water with a temperature of about 40 ºС. If the power capacity allows, it can produce more hot water, but will consume more energy.
2. Certain requirements for an existing power grid - voltage should be stable.
3. Cannot provide hot water at the same time multiple waterproof points.

Gas water heaters

The gas heater can be installed only when a gas trunk pipe is laid in the bath or in the presence of a gas cylinder. The installation of such aggregates is rather complicated, but for water heating compared to electric they are much more economical.

Cumulative type

Such devices have high performance. With their help, it is possible to heat the water with its constant consumption and store in the tank in a requirement with automatic temperature maintenance.
Advantages of a gas cumulative water heater:
1. Permanent stock of a large number of heated water.
2. Less persecuted in the formation of scale in the heat exchanger.
3. It is not terrible low pressure gas and water in highways.
4. Possible simultaneous supply of heated water at several points of consumption.
Minus It is a need for gas highway, low power and not low cost.

Flow-up

Gas heater of water flowable allows you to instantly feed hot water in any quantity compared with small operating costs. The equipment is suitable for use at low pressure in the supply highways of water and gas. Gas heaters work silently and economically spend resources.

Advantages of gas columns:
1. Excellent budget option.
2. The power of the gas line is quite enough for good work.
3. Water supply in several watershed points.
4. Not a complex installation and compact sizes.
5. Instant water heating.
Disadvantages:
1. Fire hazard and explosion of gas.
2. The serviceability depends on the degree of humidity in the bath.
3. The need for a gas highway.
4. There must be chimney for emissions of combustion waste.

Inspection type heaters

The devices of indirect heating are used in the rooms where the simultaneous supply of a sufficiently large number of hot water from various sources is needed. They do not depend on electricity, fuel and gas. Compared with other water heating equipment, this type has fewer times, which is required for water heating. The device itself is attached to the heating boiler, and the water heats up with the built-in element inside the design.

Features of indirect type heaters:
1. Food from various heating systems.
2. No formation of scale.
3. Heat water evenly and faster.
4. Great performance.

When choosing a water heater for a bath, you should also pay attention to the type of heating element, the power of the device, the volume, internal and external coating of the tank.